The pico-I/O peripheral expansion board stacks on top of the picoFlash single board computer giving 32 digital inputs, 20 digital outputs, and 11 channels of 12 bit analog input without the need for extra cabling. A standard 9-pin ribbon cable can be used on the pico-I/O to provide access to the picoFlash Serial Debug Port. To facilitate your application development, a library of C and Quickbasic functions is supplied.
pico-I/O Peripheral Kit (99-0130) includes the pico-I/O peripheral board, shells and pins kit, standoffs, and manual.
* Digital Inputs 32 total, 4 w/ pull ups TTLcompatible
* Digital Outputs 20 total, TTL compatible,
25mA source & sink
* Analog Inputs 11 channels, 12 bits Input range 0 to 5V,
Resolution 1.22mV, Op-amp buffered, Low-pass filtered
* Software Drivers Unified A/D & digital I/O driver
for C/C++ & Quick Basic Keypad & LCD drivers
pico I/O - $65.00 (Quantity 1)
pico I/O Development Kit - $72.00 (Quantity 1)
12228 E Bennett Rd. Grass Valley, CA 95945
Phone (530) 297-6073
Fax (530) 297-6074
© 2016 JK microsystems, Inc. All rights reserved.
Offering embedded computer solutions since 1996
pico I/O
